When you are looking for a change or desiring to
have a unique yet classic touch to your room, costume, or vehicle the one thing
that perfectly fits in the case is none other than Decals & Stickers.
Decals are a popular choice of people that has a
large variety of color, design, pattern, and quote options such as DC quote
decals, anime printed decal, racing car decal, and military-inspired army,
Veteran, air force decals and so on.
But the most significant myth that takes the people’s
foot backward is that “the decals are difficult to replace and apply”- which is
honestly not. If the right steps are followed the decals can be applied in fewer
minutes.
To know more about how to replace and apply a new
decal in the place of the older decal stay connected until the end of the content
to get acknowledged.
Part 1: Removing the old
decal off the car surface
Step
1: Sponge the decal
Whether it’s a customized air force decal or Static
cling decal almost every decal is extremely stubborn to remove from any surface
so you need to be quite aggressive while removing it effectively off the
surface.
Prepare 1 or ½ bucket of warm water mixed with a few
drops of dish-washing liquid or washing detergent. Then dip a sponge in the
bucket, let it absorb the solution effectively and then by the side transfer
the sponge against the decaled wall and move your hands vigorously to remove
all the dirt and grime that might become a hurdle in the process of separating
the decal off the wall.
Step 2: Rinse & Dry the Decal surface
After sponging the decal surface now
get it rinsed with some clean water if possible then use warm water to wash the
surface well so that no steak of soap is left behind. Simultaneously, pat dries
the surface using a microfiber cloth; thoroughly rub it against the decal to
absorb all the excessive moisture.
Wait for fewer minutes to let it
dry.
Step 3: Try to peel off the weaker points
After through water wash and
rubbing the decal is most likely to lose its stickiness to some extent, if this
same happen with your decal then it will make the decal peeling off process
much easier.
Stare and try to figure out which decal
corner has weakened its spots and if you detect any then lift it up using your
nails and fingers. Pull and take off the weak corners.
Step 4: Apply heat to loosen the adhesive
It’s time to blow dry! Yes, you
heard it right now next, we are going to blow dry the decal’s surface using a
dryer, dryer’s heat make the adhesive loosen and easy to peel off without great
efforts.
Hold the dryer close i.e. a couple
of inches apart from the decal and give it time to do the work. Soon you’ll
notice the decal will start to come off until the warmth of the blow dryer is
in contact.
Step 5: Use rubbing alcohol
Now that you have blow-dried the
decal and fewer portions of it have appeared to peel off, it’s the best time to
apply to rub alcohol on it to remove the further decal’s edges.
Get the rubbing alcohol applied on
the decal corners.
Step
6: Scrape the decal
After doing the sponge, heat, and rubbing alcohol now
undoubtedly the decal will come off easily.
Use a rubber scraper, your nails, or any object with
sharp edges so that the leftover decal comes off easily.
Make sure not to use a fragile object such as a
razor blade or scissors to get it removed.
Step
7: Removing the leftover decal adhesive off the surface
Even though after removing the decal their might the
leftover adhesive on the decaled surface which might concern you so here’s the
best way to remove that stickiness off the car surface.
How
to remove decal adhesive permanently?
·
Use a glue remover and put a dab of it
on a microfiber cloth. Rub it on the adhesive surface and wait for a couple of
minutes, then wipe it off with soapy solution. Repeat the process twice or
thrice until the adhesive effectively vanishes.
·
Now that the stickiness is removed, use
warm water and sponge to rinse the surface and remove the existing debris
·
Finally, conclude the process by
applying a coat of car wax and car polish on the treated surface
Part 2: Applying the new
decal in place of the old decal
Step
1: Measure & mark the decal size on the surface
Measure the length and
breadth of the new decal with a measuring tape, then simultaneously mark the
measured size on the car surface where you want to apply it. If you do not want to bother the car surface
by marking the sizes with a pencil or any tool then you may simply use the tape
cutouts and place it accordingly, in a way as if you are bordering the decal.
Step
2: Clean the surface before applying the decal
If you have just
removed the old decal and re-applying a new one in its place the next moment then
you may not need to stress over cleaning the surface much as it has already
been effectively cleaned in the previous process.
Still to be on a safer side simply rinse the surface
with clean water and pat dry using a cloth.
Step
3: Applying the decal & Sticker
Peel off the back of the decal and place it facing
the adhesive side towards the car surface against the measured position.
To avoid the air or bubble surface to appear inside
the decal using a credit card and slide-press it against the decal in a way up
to down.
Let it sit for about 30 minutes and peel the back of
the decal carefully.
Decals allow you to customize the look of almost anything
from the vehicles to the house walls, it elevates the beauty of the surface where
it’s applied to the next level. Whether it’s about cheering your favorite
marvel character or supporting the military men with the air force decals, marine decals, and much more these decals never
misses a chance to portray one’s love and support to the world.
If you are wishing to purchase an alternative of
your boring car’s or house’s decals then you may consider buying it with the
Military Republic online store. Visit the website wwwww to start shopping!