How to replace old decals easily off the car surface?

When you are looking for a change or desiring to have a unique yet classic touch to your room, costume, or vehicle the one thing that perfectly fits in the case is none other than Decals & Stickers.

Decals are a popular choice of people that has a large variety of color, design, pattern, and quote options such as DC quote decals, anime printed decal, racing car decal, and military-inspired army, Veteran, air force decals and so on.

But the most significant myth that takes the people’s foot backward is that “the decals are difficult to replace and apply”- which is honestly not. If the right steps are followed the decals can be applied in fewer minutes.

To know more about how to replace and apply a new decal in the place of the older decal stay connected until the end of the content to get acknowledged.

Part 1: Removing the old decal off the car surface

Step 1: Sponge the decal

Whether it’s a customized air force decal or Static cling decal almost every decal is extremely stubborn to remove from any surface so you need to be quite aggressive while removing it effectively off the surface.

Prepare 1 or ½ bucket of warm water mixed with a few drops of dish-washing liquid or washing detergent. Then dip a sponge in the bucket, let it absorb the solution effectively and then by the side transfer the sponge against the decaled wall and move your hands vigorously to remove all the dirt and grime that might become a hurdle in the process of separating the decal off the wall.

Step 2: Rinse & Dry the Decal surface

After sponging the decal surface now get it rinsed with some clean water if possible then use warm water to wash the surface well so that no steak of soap is left behind. Simultaneously, pat dries the surface using a microfiber cloth; thoroughly rub it against the decal to absorb all the excessive moisture.

Wait for fewer minutes to let it dry.

Step 3: Try to peel off the weaker points

After through water wash and rubbing the decal is most likely to lose its stickiness to some extent, if this same happen with your decal then it will make the decal peeling off process much easier.

Stare and try to figure out which decal corner has weakened its spots and if you detect any then lift it up using your nails and fingers. Pull and take off the weak corners.

Step 4: Apply heat to loosen the adhesive

It’s time to blow dry! Yes, you heard it right now next, we are going to blow dry the decal’s surface using a dryer, dryer’s heat make the adhesive loosen and easy to peel off without great efforts.

Hold the dryer close i.e. a couple of inches apart from the decal and give it time to do the work. Soon you’ll notice the decal will start to come off until the warmth of the blow dryer is in contact.

Step 5: Use rubbing alcohol

Now that you have blow-dried the decal and fewer portions of it have appeared to peel off, it’s the best time to apply to rub alcohol on it to remove the further decal’s edges.

Get the rubbing alcohol applied on the decal corners.

Step 6: Scrape the decal

After doing the sponge, heat, and rubbing alcohol now undoubtedly the decal will come off easily.

Use a rubber scraper, your nails, or any object with sharp edges so that the leftover decal comes off easily.

Make sure not to use a fragile object such as a razor blade or scissors to get it removed.

Step 7: Removing the leftover decal adhesive off the surface

Even though after removing the decal their might the leftover adhesive on the decaled surface which might concern you so here’s the best way to remove that stickiness off the car surface.

How to remove decal adhesive permanently?

·         Use a glue remover and put a dab of it on a microfiber cloth. Rub it on the adhesive surface and wait for a couple of minutes, then wipe it off with soapy solution. Repeat the process twice or thrice until the adhesive effectively vanishes.

·         Now that the stickiness is removed, use warm water and sponge to rinse the surface and remove the existing debris

·         Finally, conclude the process by applying a coat of car wax and car polish on the treated surface

Part 2: Applying the new decal in place of the old decal

Step 1: Measure & mark the decal size on the surface

Measure the length and breadth of the new decal with a measuring tape, then simultaneously mark the measured size on the car surface where you want to apply it.  If you do not want to bother the car surface by marking the sizes with a pencil or any tool then you may simply use the tape cutouts and place it accordingly, in a way as if you are bordering the decal.

Step 2: Clean the surface before applying the decal

If you have just removed the old decal and re-applying a new one in its place the next moment then you may not need to stress over cleaning the surface much as it has already been effectively cleaned in the previous process.

Still to be on a safer side simply rinse the surface with clean water and pat dry using a cloth.

Step 3: Applying the decal & Sticker

Peel off the back of the decal and place it facing the adhesive side towards the car surface against the measured position.

To avoid the air or bubble surface to appear inside the decal using a credit card and slide-press it against the decal in a way up to down.

Let it sit for about 30 minutes and peel the back of the decal carefully.

Decals allow you to customize the look of almost anything from the vehicles to the house walls, it elevates the beauty of the surface where it’s applied to the next level. Whether it’s about cheering your favorite marvel character or supporting the military men with the air force decals, marine decals, and much more these decals never misses a chance to portray one’s love and support to the world.

If you are wishing to purchase an alternative of your boring car’s or house’s decals then you may consider buying it with the Military Republic online store. Visit the website wwwww to start shopping!